Will my artwork print on a real snowboard?
Upload your image, pick your board, and get an instant verdict against the makers' real file specs: Donek needs a full-size file at 150 DPI; Prior needs 300 DPI on a board-length + 6 cm × 34 cm canvas. Most artwork that gets rejected fails on pixels, not on art — this takes ten seconds to check.
By Ray · BoardCanvas · Specs checked against the official maker pages, November 2026
Drop your artwork here, or click to choose a file
PNG, JPG, TIFF exports and photos all work — the checker reads pixel dimensions
Your image never leaves your browser — the check runs entirely on your device.
How the check works
Printing is a pixel budget. A board is 140–170 cm of physical length, and the maker's DPI spec turns that into a required pixel count: a 160 cm board at Prior's 300 DPI needs a canvas about 19,700 × 4,016 px, while the same board at Donek's 150 DPI needs roughly half that in each dimension. The checker takes the long side of your image as the board's length, the short side as its width, and grades the tighter of the two ratios.
The verdicts are deliberately practical, not pass/fail theatre: at 100% or more of the spec you are print-ready; between about 60% and 100%, upscaling prints well for photos and painterly AI art (the styles that forgive interpolation); below that, the honest options are a smaller size or a higher-resolution source. If you generated the image with AI, our guide on turning AI images into printable designs walks the whole path.
Frequently asked questions
How does the checker judge my image?
It compares your image's pixel dimensions with each maker's published file spec for the board size you pick: Donek wants a full-size file at 150 DPI, Prior wants 300 DPI on a canvas of board length + 6 cm × 34 cm, and Offshore — which publishes no fixed spec — is checked against a strict 300 DPI safe-aim target.
My image falls short — is it unusable?
Usually not. Between roughly 60% and 100% of the target, upscaling prints well for photographs and painterly art; only crisp line art and logos soften visibly. Below that, pick a smaller board size, upscale with a dedicated tool, or regenerate the artwork at a higher resolution.
Is my image uploaded to a server?
No. The checker reads the file's pixel dimensions locally in your browser. The image never leaves your device.
Why does the width check use 34 cm for Prior and the nose width for Donek?
Makers ask for an untrimmed rectangle that covers the whole board. Prior fixes that canvas at board length + 6 cm × 34 cm. Donek asks for a full-size file, so the rectangle's short side is set by the widest point of your chosen size — its nose width — which is the conservative reading of the requirement.