BoardCanvas
Sign In
Guides & comparisons

Design Custom Graphics for Your Donek Turner Freecarve

Direct Answer

The Donek Turner Freecarve is a carve snowboard (directional) offered in sizes 157 / 161. You can design custom graphics for the Turner Freecarve free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).

By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026

What are the key facts about the Donek Turner Freecarve?

Category / shapeCarve · directional
Sizes (cm)157 / 161
Waist width range248–252 mm
161 cm specsRunning length 1170 mm · nose 304 mm · waist 252 mm · tail 294 mm · sidecut 9.8 m · taper 10 mm
Custom graphic route (Donek)Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11)
BoardCanvas templateExact Turner Freecarve outline in every size — free, no account needed

What sizes and specs does the Turner Freecarve come in?

Every size of the Turner Freecarve with the dimensions that matter for both riding and artwork placement. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.

  • 157 cm — running length 1130 mm, nose 298 mm, waist 248 mm, tail 288 mm, sidecut 9 m, taper 10 mm
  • 161 cm — running length 1170 mm, nose 304 mm, waist 252 mm, tail 294 mm, sidecut 9.8 m, taper 10 mm

Design notes for the Turner Freecarve

On the 161 cm, the nose measures 304 mm against a 294 mm tail and a 252 mm waist, with a 9.8 m sidecut (the range runs 9–9.8 m across sizes). The Turner Freecarve carries 10 mm of taper at its largest, a directional shape where the nose leads. Artwork with a clear front focal point near the nose and a calmer tail reads naturally on it. Keep the centre third clean around the binding inserts and let one strong element run the full length of the board.

How custom graphics work on the Turner Freecarve

Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.

Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.

Design on the exact Turner Freecarve outline

BoardCanvas loads the Turner Freecarve's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (304/294 mm on the 161). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.

How to do it in BoardCanvas

  1. 1Open the Donek Turner Freecarve in the editor (button below) and pick your size
  2. 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
  3. 3Check edges, reflections and binding-insert placement in the interactive 3D preview
  4. 4Export the print-ready file and send it with your Donek order

Frequently asked questions

What sizes does the Donek Turner Freecarve come in?

The Turner Freecarve is offered in 157 / 161 (cm), with waist widths from 248 to 252 mm. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width.

Can I put my own graphic on a Donek Turner Freecarve?

Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.

What artwork suits the Turner Freecarve's shape?

On the 161 cm, the nose measures 304 mm against a 294 mm tail and a 252 mm waist, with a 9.8 m sidecut (the range runs 9–9.8 m across sizes). The Turner Freecarve carries 10 mm of taper at its largest, a directional shape where the nose leads. Artwork with a clear front focal point near the nose and a calmer tail reads naturally on it. Keep the centre third clean around the binding inserts and let one strong element run the full length of the board.

Does BoardCanvas have the exact Turner Freecarve template?

Yes. The editor includes the Turner Freecarve in every size (157 / 161) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.

Design it now — free

Browser editor, interactive 3D preview and PNG export are free. No account needed.

Design the Turner Freecarve in the editor