Design Custom Graphics for Your Donek Incline
The Donek Incline is a freeride snowboard (directional) offered in sizes 152 / 156 / 160 / 164. You can design custom graphics for the Incline free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).
By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026
What are the key facts about the Donek Incline?
| Category / shape | Freeride · directional |
|---|---|
| Sizes (cm) | 152 / 156 / 160 / 164 |
| Waist width range | 250–262 mm |
| 160 cm specs | Running length 1140 mm · nose 305 mm · waist 258 mm · tail 300 mm · sidecut 9 m · taper 5 mm |
| Custom graphic route (Donek) | Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11) |
| BoardCanvas template | Exact Incline outline in every size — free, no account needed |
What sizes and specs does the Incline come in?
Every size of the Incline with the dimensions that matter for both riding and artwork placement. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.
- 152 cm — running length 1080 mm, nose 295 mm, waist 250 mm, tail 290 mm, sidecut 8 m, taper 5 mm
- 156 cm — running length 1110 mm, nose 300 mm, waist 254 mm, tail 295 mm, sidecut 8.5 m, taper 5 mm
- 160 cm — running length 1140 mm, nose 305 mm, waist 258 mm, tail 300 mm, sidecut 9 m, taper 5 mm
- 164 cm — running length 1170 mm, nose 310 mm, waist 262 mm, tail 305 mm, sidecut 9.5 m, taper 5 mm
Design notes for the Incline
On the 160 cm, the nose measures 305 mm against a 300 mm tail and a 258 mm waist, with a 9 m sidecut (the range runs 8–9.5 m across sizes). Taper is minimal (5 mm at most), so the Incline is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Freeride art reads at chairlift distance: large shapes, high contrast and a restrained palette hold up in flat light and snow spray far better than fine illustration.
How custom graphics work on the Incline
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.
Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.
Design on the exact Incline outline
BoardCanvas loads the Incline's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (305/300 mm on the 160). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.
How to do it in BoardCanvas
- 1Open the Donek Incline in the editor (button below) and pick your size
- 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
- 3Check edges, reflections and binding-insert placement in the interactive 3D preview
- 4Export the print-ready file and send it with your Donek order
Frequently asked questions
What sizes does the Donek Incline come in?
The Incline is offered in 152 / 156 / 160 / 164 (cm), with waist widths from 250 to 262 mm. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5.
Can I put my own graphic on a Donek Incline?
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.
What artwork suits the Incline's shape?
On the 160 cm, the nose measures 305 mm against a 300 mm tail and a 258 mm waist, with a 9 m sidecut (the range runs 8–9.5 m across sizes). Taper is minimal (5 mm at most), so the Incline is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Freeride art reads at chairlift distance: large shapes, high contrast and a restrained palette hold up in flat light and snow spray far better than fine illustration.
Does BoardCanvas have the exact Incline template?
Yes. The editor includes the Incline in every size (152 / 156 / 160 / 164) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.
Design it now — free
Browser editor, interactive 3D preview and PNG export are free. No account needed.