Design Custom Graphics for Your Donek Flux
The Donek Flux is a carve snowboard (directional) offered in sizes 156 / 160. You can design custom graphics for the Flux free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).
By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026
What are the key facts about the Donek Flux?
| Category / shape | Carve · directional |
|---|---|
| Sizes (cm) | 156 / 160 |
| Waist width range | 255–260 mm |
| 160 cm specs | Running length 1150 mm · nose 308 mm · waist 260 mm · tail 302 mm · sidecut 9 m · taper 6 mm |
| Custom graphic route (Donek) | Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11) |
| BoardCanvas template | Exact Flux outline in every size — free, no account needed |
What sizes and specs does the Flux come in?
Every size of the Flux with the dimensions that matter for both riding and artwork placement. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.
- 156 cm — running length 1120 mm, nose 302 mm, waist 255 mm, tail 296 mm, sidecut 8.5 m, taper 6 mm
- 160 cm — running length 1150 mm, nose 308 mm, waist 260 mm, tail 302 mm, sidecut 9 m, taper 6 mm
Design notes for the Flux
On the 160 cm, the nose measures 308 mm against a 302 mm tail and a 260 mm waist, with a 9 m sidecut (the range runs 8.5–9 m across sizes). Taper is minimal (6 mm at most), so the Flux is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Keep the centre third clean around the binding inserts and let one strong element run the full length of the board.
How custom graphics work on the Flux
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.
Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.
Design on the exact Flux outline
BoardCanvas loads the Flux's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (308/302 mm on the 160). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.
How to do it in BoardCanvas
- 1Open the Donek Flux in the editor (button below) and pick your size
- 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
- 3Check edges, reflections and binding-insert placement in the interactive 3D preview
- 4Export the print-ready file and send it with your Donek order
Frequently asked questions
What sizes does the Donek Flux come in?
The Flux is offered in 156 / 160 (cm), with waist widths from 255 to 260 mm. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5.
Can I put my own graphic on a Donek Flux?
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.
What artwork suits the Flux's shape?
On the 160 cm, the nose measures 308 mm against a 302 mm tail and a 260 mm waist, with a 9 m sidecut (the range runs 8.5–9 m across sizes). Taper is minimal (6 mm at most), so the Flux is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Keep the centre third clean around the binding inserts and let one strong element run the full length of the board.
Does BoardCanvas have the exact Flux template?
Yes. The editor includes the Flux in every size (156 / 160) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.
Design it now — free
Browser editor, interactive 3D preview and PNG export are free. No account needed.