BoardCanvas
Sign In
Guides & comparisons

Design Custom Graphics for Your Donek Baker

Direct Answer

The Donek Baker is a carve snowboard (directional) offered in sizes 154 / 158. You can design custom graphics for the Baker free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).

By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026

What are the key facts about the Donek Baker?

Category / shapeCarve · directional
Sizes (cm)154 / 158
Waist width range258–262 mm
158 cm specsRunning length 1130 mm · nose 310 mm · waist 262 mm · tail 303 mm · sidecut 8.6 m · taper 7 mm
Custom graphic route (Donek)Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11)
BoardCanvas templateExact Baker outline in every size — free, no account needed

What sizes and specs does the Baker come in?

Every size of the Baker with the dimensions that matter for both riding and artwork placement. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.

  • 154 cm — running length 1100 mm, nose 305 mm, waist 258 mm, tail 298 mm, sidecut 8.2 m, taper 7 mm
  • 158 cm — running length 1130 mm, nose 310 mm, waist 262 mm, tail 303 mm, sidecut 8.6 m, taper 7 mm

Design notes for the Baker

On the 158 cm, the nose measures 310 mm against a 303 mm tail and a 262 mm waist, with a 8.6 m sidecut (the range runs 8.2–8.6 m across sizes). Taper is minimal (7 mm at most), so the Baker is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Keep the centre third clean around the binding inserts and let one strong element run the full length of the board.

How custom graphics work on the Baker

Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.

Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.

Design on the exact Baker outline

BoardCanvas loads the Baker's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (310/303 mm on the 158). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.

How to do it in BoardCanvas

  1. 1Open the Donek Baker in the editor (button below) and pick your size
  2. 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
  3. 3Check edges, reflections and binding-insert placement in the interactive 3D preview
  4. 4Export the print-ready file and send it with your Donek order

Frequently asked questions

What sizes does the Donek Baker come in?

The Baker is offered in 154 / 158 (cm), with waist widths from 258 to 262 mm. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5.

Can I put my own graphic on a Donek Baker?

Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.

What artwork suits the Baker's shape?

On the 158 cm, the nose measures 310 mm against a 303 mm tail and a 262 mm waist, with a 8.6 m sidecut (the range runs 8.2–8.6 m across sizes). Taper is minimal (7 mm at most), so the Baker is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Keep the centre third clean around the binding inserts and let one strong element run the full length of the board.

Does BoardCanvas have the exact Baker template?

Yes. The editor includes the Baker in every size (154 / 158) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.

Design it now — free

Browser editor, interactive 3D preview and PNG export are free. No account needed.

Design the Baker in the editor