Design Custom Graphics for Your Donek Raven
The Donek Raven is an all-mountain snowboard (directional) offered in sizes 152 / 156. You can design custom graphics for the Raven free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).
By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026
What are the key facts about the Donek Raven?
| Category / shape | All-Mountain · directional |
|---|---|
| Sizes (cm) | 152 / 156 |
| Waist width range | 250–255 mm |
| 156 cm specs | Running length 1110 mm · nose 302 mm · waist 255 mm · tail 296 mm · sidecut 7.8 m · taper 6 mm |
| Custom graphic route (Donek) | Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11) |
| BoardCanvas template | Exact Raven outline in every size — free, no account needed |
What sizes and specs does the Raven come in?
Every size of the Raven with the dimensions that matter for both riding and artwork placement. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.
- 152 cm — running length 1080 mm, nose 296 mm, waist 250 mm, tail 290 mm, sidecut 7.5 m, taper 6 mm
- 156 cm — running length 1110 mm, nose 302 mm, waist 255 mm, tail 296 mm, sidecut 7.8 m, taper 6 mm
Design notes for the Raven
On the 156 cm, the nose measures 302 mm against a 296 mm tail and a 255 mm waist, with a 7.8 m sidecut (the range runs 7.5–7.8 m across sizes). Taper is minimal (6 mm at most), so the Raven is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. All-mountain boards take the widest range of art: keep the centre third clean around the inserts and let one strong element run the full length, so the design survives being half-covered by bindings and boots.
How custom graphics work on the Raven
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.
Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.
Design on the exact Raven outline
BoardCanvas loads the Raven's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (302/296 mm on the 156). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.
How to do it in BoardCanvas
- 1Open the Donek Raven in the editor (button below) and pick your size
- 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
- 3Check edges, reflections and binding-insert placement in the interactive 3D preview
- 4Export the print-ready file and send it with your Donek order
Frequently asked questions
What sizes does the Donek Raven come in?
The Raven is offered in 152 / 156 (cm), with waist widths from 250 to 255 mm. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width.
Can I put my own graphic on a Donek Raven?
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.
What artwork suits the Raven's shape?
On the 156 cm, the nose measures 302 mm against a 296 mm tail and a 255 mm waist, with a 7.8 m sidecut (the range runs 7.5–7.8 m across sizes). Taper is minimal (6 mm at most), so the Raven is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. All-mountain boards take the widest range of art: keep the centre third clean around the inserts and let one strong element run the full length, so the design survives being half-covered by bindings and boots.
Does BoardCanvas have the exact Raven template?
Yes. The editor includes the Raven in every size (152 / 156) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.
Design it now — free
Browser editor, interactive 3D preview and PNG export are free. No account needed.