BoardCanvas
Sign In
Guides & comparisons

Design Custom Graphics for Your Donek Kona

Direct Answer

The Donek Kona is a freeride snowboard (directional) offered in sizes 153 / 157. You can design custom graphics for the Kona free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).

By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026

What are the key facts about the Donek Kona?

Category / shapeFreeride · directional
Sizes (cm)153 / 157
Waist width range254–258 mm
157 cm specsRunning length 1110 mm · nose 306 mm · waist 258 mm · tail 301 mm · sidecut 8.1 m · taper 5 mm
Custom graphic route (Donek)Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11)
BoardCanvas templateExact Kona outline in every size — free, no account needed

What sizes and specs does the Kona come in?

Every size of the Kona with the dimensions that matter for both riding and artwork placement. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.

  • 153 cm — running length 1080 mm, nose 300 mm, waist 254 mm, tail 295 mm, sidecut 7.7 m, taper 5 mm
  • 157 cm — running length 1110 mm, nose 306 mm, waist 258 mm, tail 301 mm, sidecut 8.1 m, taper 5 mm

Design notes for the Kona

On the 157 cm, the nose measures 306 mm against a 301 mm tail and a 258 mm waist, with a 8.1 m sidecut (the range runs 7.7–8.1 m across sizes). Taper is minimal (5 mm at most), so the Kona is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Freeride art reads at chairlift distance: large shapes, high contrast and a restrained palette hold up in flat light and snow spray far better than fine illustration.

How custom graphics work on the Kona

Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.

Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.

Design on the exact Kona outline

BoardCanvas loads the Kona's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (306/301 mm on the 157). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.

How to do it in BoardCanvas

  1. 1Open the Donek Kona in the editor (button below) and pick your size
  2. 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
  3. 3Check edges, reflections and binding-insert placement in the interactive 3D preview
  4. 4Export the print-ready file and send it with your Donek order

Frequently asked questions

What sizes does the Donek Kona come in?

The Kona is offered in 153 / 157 (cm), with waist widths from 254 to 258 mm. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width.

Can I put my own graphic on a Donek Kona?

Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.

What artwork suits the Kona's shape?

On the 157 cm, the nose measures 306 mm against a 301 mm tail and a 258 mm waist, with a 8.1 m sidecut (the range runs 7.7–8.1 m across sizes). Taper is minimal (5 mm at most), so the Kona is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. Freeride art reads at chairlift distance: large shapes, high contrast and a restrained palette hold up in flat light and snow spray far better than fine illustration.

Does BoardCanvas have the exact Kona template?

Yes. The editor includes the Kona in every size (153 / 157) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.

Design it now — free

Browser editor, interactive 3D preview and PNG export are free. No account needed.

Design the Kona in the editor