Design Custom Graphics for Your Donek Aloha
The Donek Aloha is an all-mountain snowboard (directional) offered in sizes 152 / 156. You can design custom graphics for the Aloha free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11).
By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026
What are the key facts about the Donek Aloha?
| Category / shape | All-Mountain · directional |
|---|---|
| Sizes (cm) | 152 / 156 |
| Waist width range | 252–257 mm |
| 156 cm specs | Running length 1110 mm · nose 304 mm · waist 257 mm · tail 298 mm · sidecut 7.9 m · taper 6 mm |
| Custom graphic route (Donek) | Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11) |
| BoardCanvas template | Exact Aloha outline in every size — free, no account needed |
What sizes and specs does the Aloha come in?
Every size of the Aloha with the dimensions that matter for both riding and artwork placement. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.
- 152 cm — running length 1080 mm, nose 298 mm, waist 252 mm, tail 292 mm, sidecut 7.5 m, taper 6 mm
- 156 cm — running length 1110 mm, nose 304 mm, waist 257 mm, tail 298 mm, sidecut 7.9 m, taper 6 mm
Design notes for the Aloha
On the 156 cm, the nose measures 304 mm against a 298 mm tail and a 257 mm waist, with a 7.9 m sidecut (the range runs 7.5–7.9 m across sizes). Taper is minimal (6 mm at most), so the Aloha is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. All-mountain boards take the widest range of art: keep the centre third clean around the inserts and let one strong element run the full length, so the design survives being half-covered by bindings and boots.
How custom graphics work on the Aloha
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base.
Donek accepts AI/SVG vector files or 150 DPI JPG/TIF (RGB) as a full, untrimmed template rectangle — not files cut to the board outline, and not Photoshop files.
Design on the exact Aloha outline
BoardCanvas loads the Aloha's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (304/298 mm on the 156). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Donek order.
How to do it in BoardCanvas
- 1Open the Donek Aloha in the editor (button below) and pick your size
- 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
- 3Check edges, reflections and binding-insert placement in the interactive 3D preview
- 4Export the print-ready file and send it with your Donek order
Frequently asked questions
What sizes does the Donek Aloha come in?
The Aloha is offered in 152 / 156 (cm), with waist widths from 252 to 257 mm. Widths are standard, generally suiting boots up to about US 10.5; riders with larger boots usually size up in length for the extra width.
Can I put my own graphic on a Donek Aloha?
Donek builds every board to order and offers custom graphics directly: a topsheet printed with your own artwork, a printed base, or a premium die-cut base. Donek custom topsheet with your art: +$100; printed base: +$120; die-cut base: +$165 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.
What artwork suits the Aloha's shape?
On the 156 cm, the nose measures 304 mm against a 298 mm tail and a 257 mm waist, with a 7.9 m sidecut (the range runs 7.5–7.9 m across sizes). Taper is minimal (6 mm at most), so the Aloha is close to a true twin in outline: centred, symmetrical artwork and mirrored nose/tail elements sit naturally on it. All-mountain boards take the widest range of art: keep the centre third clean around the inserts and let one strong element run the full length, so the design survives being half-covered by bindings and boots.
Does BoardCanvas have the exact Aloha template?
Yes. The editor includes the Aloha in every size (152 / 156) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.
Design it now — free
Browser editor, interactive 3D preview and PNG export are free. No account needed.