Design Custom Graphics for Your Offshore Snow Shapes Spliff
The Offshore Snow Shapes Spliff is a powder snowboard (directional) offered in sizes 144 / 148. You can design custom graphics for the Spliff free in BoardCanvas: the editor carries its exact template in every size, so you can upload your own artwork or generate it with AI, check the result in interactive 3D, and export a print-ready file. Offshore iD tier: from ¥340,000; Custom tier (your artwork): from ¥500,000 (checked 2026-11-11).
By Ray · BoardCanvas · Model specs checked against the official maker pages, November 2026
What are the key facts about the Offshore Snow Shapes Spliff?
| Category / shape | Powder · directional |
|---|---|
| Sizes (cm) | 144 / 148 |
| Waist width range | 262–268 mm |
| 148 cm specs | Running length 1020 mm · nose 318 mm · waist 268 mm · tail 301 mm · sidecut 6.8 m · taper 17 mm |
| Custom graphic route (Offshore Snow Shapes) | Offshore iD tier: from ¥340,000; Custom tier (your artwork): from ¥500,000 (checked 2026-11-11) |
| BoardCanvas template | Exact Spliff outline in every size — free, no account needed |
What sizes and specs does the Spliff come in?
Every size of the Spliff with the dimensions that matter for both riding and artwork placement. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5. When you design in BoardCanvas, the template switches to the exact outline of the size you pick, so what you see is the board that gets built.
- 144 cm — running length 990 mm, nose 312 mm, waist 262 mm, tail 295 mm, sidecut 6.5 m, taper 17 mm
- 148 cm — running length 1020 mm, nose 318 mm, waist 268 mm, tail 301 mm, sidecut 6.8 m, taper 17 mm
Design notes for the Spliff
On the 148 cm, the nose measures 318 mm against a 301 mm tail and a 268 mm waist, with a 6.8 m sidecut (the range runs 6.5–6.8 m across sizes). The Spliff carries 17 mm of taper at its largest, a directional shape where the nose leads. Artwork with a clear front focal point near the nose and a calmer tail reads naturally on it. Powder shapes have the longest, widest noses in the range — that nose is a billboard. Give it the hero element and let the artwork thin out toward the narrower tail.
How custom graphics work on the Spliff
Offshore Snow Shapes' production models ship with fixed graphics; fully custom artwork is offered through its made-to-order tiers in Niseko, Japan — the Custom tier sublimates your own artwork, while the iD tier personalises textures, colours, logo and name.
Because Offshore's custom tiers are quoted and built by hand, a BoardCanvas design on the model's exact outline is the practical way to develop and present the artwork before ordering.
Design on the exact Spliff outline
BoardCanvas loads the Spliff's real outline and the standard 4x4 binding-insert pattern, so faces, text and logos stay clear of the inserts and the artwork wraps the actual nose and tail widths (318/301 mm on the 148). Rotate the board in 3D before exporting — the PNG export is free and high-resolution, and vector outlines are available on the Starter plan and up. BoardCanvas is a design tool and does not sell snowboards; you send the exported file with your Offshore Snow Shapes order.
How to do it in BoardCanvas
- 1Open the Offshore Snow Shapes Spliff in the editor (button below) and pick your size
- 2Upload your own artwork or generate a full-board design with AI (10 credits per generation)
- 3Check edges, reflections and binding-insert placement in the interactive 3D preview
- 4Export the print-ready file and send it with your Offshore Snow Shapes order
Frequently asked questions
What sizes does the Offshore Snow Shapes Spliff come in?
The Spliff is offered in 144 / 148 (cm), with waist widths from 262 to 268 mm. The wider sizes generally suit US 10.5–12 boots; smaller sizes fit standard boots up to about US 10.5.
Can I put my own graphic on a Offshore Snow Shapes Spliff?
Offshore Snow Shapes' production models ship with fixed graphics; fully custom artwork is offered through its made-to-order tiers in Niseko, Japan — the Custom tier sublimates your own artwork, while the iD tier personalises textures, colours, logo and name. Offshore iD tier: from ¥340,000; Custom tier (your artwork): from ¥500,000 (checked 2026-11-11). Design the artwork first in BoardCanvas on the exact template, then send the exported file with your order.
What artwork suits the Spliff's shape?
On the 148 cm, the nose measures 318 mm against a 301 mm tail and a 268 mm waist, with a 6.8 m sidecut (the range runs 6.5–6.8 m across sizes). The Spliff carries 17 mm of taper at its largest, a directional shape where the nose leads. Artwork with a clear front focal point near the nose and a calmer tail reads naturally on it. Powder shapes have the longest, widest noses in the range — that nose is a billboard. Give it the hero element and let the artwork thin out toward the narrower tail.
Does BoardCanvas have the exact Spliff template?
Yes. The editor includes the Spliff in every size (144 / 148) with its real outline and insert pattern. Designing and exporting a high-resolution PNG is free and needs no account; AI generation costs 10 credits per full-board design.
Design it now — free
Browser editor, interactive 3D preview and PNG export are free. No account needed.